VFD , LASER AND ACORN WIRING

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
usinart
Posts: 78
Joined: Fri Dec 25, 2020 2:06 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

VFD , LASER AND ACORN WIRING

Post by usinart »

Hi
I need information on how to install/wiring those together for it work.
The laser it install and what to add the new spindle and VFD to the router.
As compagny doesn't call the wire connection the same ways and don't want to make mistake so I ask before making a bad decision !

Thanks
Alain
Attachments
VFD WIRING INFORMATION.JPG
VFD WIRING .JPG
acorn_pwn_DPSS 2 LASER WIRING.jpg
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: VFD , LASER AND ACORN WIRING

Post by martyscncgarage »

You need to PROVIDE a link to the VFD manual. (and the make and model number of YOUR VFD)
We can *TRY* and make suggestions. Please understand, this is a forum for Centroid Acorn, not for other manufacturer's products.
Import VFD's can be hit and miss.



Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
usinart
Posts: 78
Joined: Fri Dec 25, 2020 2:06 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: VFD , LASER AND ACORN WIRING

Post by usinart »

Ok Marty that vfd will be wired on a acorn board . Model is E550

https://www.simphoenix.com/uploads/dc24dd85.pdf
Thanks Marty .
Post Reply