Doesnt work with MACH3?

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Doesnt work with MACH3?

Post by Gary Campbell »

Mach 3 is more versatile than the centroid software.
I would disagree with that statement. Many software titles seem to void of feature until they are learned. Do you have a specific example?
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Dave_C
Posts: 669
Joined: Wed Nov 15, 2017 8:25 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
Location: Springfield, MO. USA
Contact:

Re: Doesnt work with MACH3?

Post by Dave_C »

Gary Campbell wrote: Tue Jun 15, 2021 11:58 am
Mach 3 is more versatile than the centroid software.
I would disagree with that statement. Many software titles seem to void of feature until they are learned. Do you have a specific example?
In defense of the OP's statement that Mach 3 is more versatile:

I've used both for years and I love my Centroid lathe and mill pro setups. No complaints! BUT, Mach 3 had better wizards!

I'll give you some examples: (All Lathe examples)

Putting a radius on a rod end with the lathe. Easy in Mach 3, just set the part radius the part Z end, the depth of the rough cut and the depth of the finish cut and go. Mach 3 wizard calculated all the passes and even made the finish pass.

Another example: Cutting an inside pocket on the lathe. Mach 3 wizard ask for the depth of the pocket, the OD of the pocket, the starting ID of the pocket and then what radius do you want. I made my flood coolant collection bowl for the lathe with that one.

Oh and another one comes to mind. Cutting an angle on the end of a part. All the passes needed are calculated by Mach 3, Intercon is hard to get even the single pass right not to mention roughing passes.

So can Intercon do some of these things. Yes, if you can ever figure out how and have the time. Most of the time I just make the part in Bob-Cad-Cam or Fusion 360.

Intercon does some things better: Thread tables and threading is a snap, doing OD turns is super easy, Id turns are easy as well but no radius option, facing off a part is easy as well. (all lathe stuff)

But when it comes to the Mill, Centroid wins hands down!

So basically Mach 3 wizards worked well on the lathe for those of us who did not come from CNC backgrounds.

Do I miss Mach 3? Nope!

Dave C.
Grizzly G0678 Mill ,CNC conversion with Acorn. G4004G Lathe, Mach 3 conversion to Acorn.
Upnorth
Posts: 237
Joined: Wed Apr 01, 2020 8:23 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 1702
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Doesnt work with MACH3?

Post by Upnorth »

Gary Campbell wrote: Tue Jun 15, 2021 11:58 am
Mach 3 is more versatile than the centroid software.
I would disagree with that statement. Many software titles seem to void of feature until they are learned. Do you have a specific example?
When I wrote that I was thinking about my mach 3 based machine being able to control 6 axis vs the 4 of the acorn. However like I said I don't care how many axis the Mach 3 system could control since it was unreliable.
tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Doesnt work with MACH3?

Post by tblough »

Well that argument doesn't hold since the same software runs AllIn1DC and Oak which do 6 and 8 axis respectively.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
adamfromscotland
Posts: 28
Joined: Wed Jul 01, 2020 11:55 am
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Doesnt work with MACH3?

Post by adamfromscotland »

A LOT Of big mouths running of steam here!

Do you guys know that if you met me you wouldnt say these things to my face?

So why do it online hidden in another country looked up in your garage!

Being big mouthed online isnt the way to go tough guys!
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Doesnt work with MACH3?

Post by martyscncgarage »

adamfromscotland wrote: Mon Jun 28, 2021 6:48 pm A LOT Of big mouths running of steam here!

Do you guys know that if you met me you wouldnt say these things to my face?

So why do it online hidden in another country looked up in your garage!

Being big mouthed online isnt the way to go tough guys!
Adam,
I don't follow you. What is the issue?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Doesnt work with MACH3?

Post by martyscncgarage »

Where are you at with your Acorn build?
You understand that you must use CNC12 to run the Acorn. Mach no longer plays a role.

Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
adamfromscotland
Posts: 28
Joined: Wed Jul 01, 2020 11:55 am
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Doesnt work with MACH3?

Post by adamfromscotland »

tblough CHEEKY BIG MOUTH!!!!!!!

Anyways im going to use the DB25 Within a few days! My only issue was as a rookie CNC DIY Build

I just got used to using mach3 afetr learning to build 2 x other CNC systems so now i feel im going back to the start again

On the DB25 Is there not a 4TH Axis? pin for my A Axis to go into? Or do i have to join them i.e. Y+A Into the same pins?

I thought the board could handle 4 x Axis
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Doesnt work with MACH3?

Post by martyscncgarage »

adamfromscotland wrote: Mon Jun 28, 2021 6:58 pm tblough CHEEKY BIG MOUTH!!!!!!!

Anyways im going to use the DB25 Within a few days! My only issue was as a rookie CNC DIY Build

I just got used to using mach3 afetr learning to build 2 x other CNC systems so now i feel im going back to the start again

On the DB25 Is there not a 4TH Axis? pin for my A Axis to go into? Or do i have to join them i.e. Y+A Into the same pins?

I thought the board could handle 4 x Axis
Let's stick with the subject at hand, if you need assistance we'll help. I think some felt you were not happy. Many of us who have had much success with Centroid and Acorn have become very supportive of it.

The Acorn DB25 on the schematics shows that it has 4 axis worth of support:
Acorn DB25.JPG
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Doesnt work with MACH3?

Post by martyscncgarage »

You say "A" axis. That implies a rotary axis.
Earlier you were concerned about the ability to pair an axis.
If you need to pair the 4th axis with the CNC12 software you will need the Pro License.
If you want, you can hardware pair, that is, send the step and direction signals from ONE of Acorn's axis to TWO stepper drivers.
If you have to reverse ONE of those steppers, you reverse one of the windings from the drive to the stepper motor (assuming a 4 wire stepper motor)
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply