Drive fault 9031 on ACORN CNC12

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Drive fault 9031 on ACORN CNC12

Post by martyscncgarage »

Try this, go into the Wizard and remove the drive enable from the inputs.
Then restart everything and see if your motor will turn or if the drive faults. If the drive faults then there may be something wrong with the drive/motor.

Check all your connections too.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Iflyb777
Posts: 30
Joined: Wed May 12, 2021 8:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF98C2BC-0421214705
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Beloit , Ks

Re: Drive fault 9031 on ACORN CNC12

Post by Iflyb777 »

ok did as you requested motor doesn't move or i got no faults driver and motor get very hot
I have put call into John no answer
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Drive fault 9031 on ACORN CNC12

Post by martyscncgarage »

Drive did not fault? And did not move?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Drive fault 9031 on ACORN CNC12

Post by martyscncgarage »

Are you using the Acorn +5vdc power supply to +PUL and +DIR and connecting -PUL and -DIR to Acorn Power Supply COM?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Iflyb777
Posts: 30
Joined: Wed May 12, 2021 8:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF98C2BC-0421214705
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Beloit , Ks

Re: Drive fault 9031 on ACORN CNC12

Post by Iflyb777 »

acorn 5vdc power supply to +PUL +DIR + ENA
-PUL to ST1 on acorn
-DIR to DR1 on acorn
-ENA to EN1 on acorn
+ALM to IN5 on acorn
-ALM to COM on acorn
Last edited by Iflyb777 on Wed Jun 09, 2021 6:00 pm, edited 1 time in total.
Iflyb777
Posts: 30
Joined: Wed May 12, 2021 8:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF98C2BC-0421214705
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Beloit , Ks

Re: Drive fault 9031 on ACORN CNC12

Post by Iflyb777 »

Marty
John is going send me new motor
thanks again for your help
let you know how it all work out I may need help down road
Larry
PS great u-tube i learn lot from them
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Drive fault 9031 on ACORN CNC12

Post by martyscncgarage »

Glad to hear. I hope it's not the drive....
By the way, it's ACORN like the nut not ACRON 😁
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Iflyb777
Posts: 30
Joined: Wed May 12, 2021 8:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF98C2BC-0421214705
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Beloit , Ks

Re: Drive fault 9031 on ACORN CNC12

Post by Iflyb777 »

thanks
typing to fast
i am also going to weight and hookup using DB 25 break out to acorn
Post Reply