VCP 2.0 In-Depth Video?

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
RogDC
Posts: 144
Joined: Wed Jan 01, 2020 2:40 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

VCP 2.0 In-Depth Video?

Post by RogDC »

Just curious if the second more in depth VCP video mentioned near the end of the VCP 2.0 Introduction Video was ever released or still planned for future release?
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: VCP 2.0 In-Depth Video?

Post by cnckeith »

the info that would be in the part 2 VCP video is covered in detail in the VCP manual found here.
https://www.centroidcnc.com/centroid_di ... manual.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply