using cnc12 4.64

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Joseph Lagana
Posts: 3
Joined: Tue Apr 27, 2021 12:04 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 4219
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

using cnc12 4.64

Post by Joseph Lagana »

Good afternoon
I hope everyone had a pleasant Memorial Day.
I would like to Thank Marty for giving Tom @ Teknic the info on ball screw rotation on 05.21.21
My current trauma…lol, how do you set G90 and G91 in CNC12 4.64 Router (Intercon) and is there a glossary of acronyms and a Programing manual available?
Thank you for your time, all the work you’ve put into producing vids, and your willingness to share your knowledge!!!
Thank You
Joe Lagana, Chestnut Cabinetry
lavrgs
Posts: 485
Joined: Sat Aug 11, 2018 11:22 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: Yes
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Oregon

Re: using cnc12 4.64

Post by lavrgs »

Search for https://www.centroidcnc.com/centroid_di ... -v4.12.pdf This manual has a section on GCodes
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: using cnc12 4.64

Post by cnckeith »

fyi..all acorn documentation is here.
viewtopic.php?f=60&t=3397
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply