Help me
Moderator: cnckeith
-
- Posts: 11
- Joined: Mon May 17, 2021 10:42 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: No
- CNC11: Yes
- CPU10 or CPU7: Yes
Help me
My lathe shows X axis overload " 410 X axis(2) position error", I check the brake is still released, the motor is removed from the table still showing error. I ask you to show me how to fix it. Thank you!
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Help me
Not enough information!
PLEASE Follow this post:
viewtopic.php?f=20&t=383
Need FRESH Report, what Centroid control are you using? What axis drives are you using?
We can not "SEE" what you "SEE"
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ