Help me

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Việt Đức
Posts: 11
Joined: Mon May 17, 2021 10:42 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC12: No
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none

Help me

Post by Việt Đức »

My lathe shows X axis overload " 410 X axis(2) position error", I check the brake is still released, the motor is removed from the table still showing error. I ask you to show me how to fix it. Thank you!
Post Reply