Hi all,
I'm modeling my control cabinet in solidworks for a cnc mill conversion, and am looking for a decent model of the acorn board and relay board. I could wip one up my self, but this seems like something someone in the forum has probably done, and I'd like to save time. I looked on the forum and in the usual spots for it (e.g. GrabCAD) with no luck. Does anyone have a decent model they would be willing to share?
CAD Model Files for the Acorn MCP
Moderator: cnckeith
-
- Posts: 3072
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: CAD Model Files for the Acorn MCP
Here's the model I created for my test panel. You should be able to pull the various components off it to use as you wish.
- Attachments
-
- AcornTestSetup.zip
- (2.95 MiB) Downloaded 75 times
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 6
- Joined: Thu May 13, 2021 1:18 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CAD Model Files for the Acorn MCP
Thanks @tblough. I needed a model with the connectors on it, so I ended up making the uploaded files.
- Attachments
-
- Centroid Acorn STEP.zip
- (7.1 MiB) Downloaded 67 times
Last edited by Kfundarek on Tue May 18, 2021 10:32 pm, edited 1 time in total.
-
- Posts: 6
- Joined: Thu May 13, 2021 1:18 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CAD Model Files for the Acorn MCP
Added model to grabCAD. Here is a link https://grabcad.com/library/centroid-ac ... endering-1
-
- Posts: 6
- Joined: Thu May 13, 2021 1:18 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: CAD Model Files for the Acorn MCP
Finished up the model to where its good enough for what I need. This should be good enough for most peoples' purposes.
Cheers
Cheers
- Attachments
-
- Centroid Acorn Solidworks Assembly.zip
- (7.1 MiB) Downloaded 71 times