Gremlins

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Gmachine
Posts: 10
Joined: Fri May 29, 2020 11:52 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F6E589-0410203112
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Gremlins

Post by Gmachine »

Sorry for the delay. Here is a resent video on YouTube with the issues. Now it is in the x and y axis. The only way I can describe the problem is that it is losing steps. The problem is coming and going in all the drives and showed up right after I updated the software to CNC12 v4.64.


I also attached all the reports I did that correspond to the video time stamps to this post.

Any help would be greatly appreciated.

Have a good Memorial day.
Attachments
report_E415F6F6E589-0410203112_2021-05-29_12-09-51.zip
(611.63 KiB) Downloaded 75 times
report_E415F6F6E589-0410203112_2021-05-29_12-09-44.zip
(615.09 KiB) Downloaded 74 times
report_E415F6F6E589-0410203112_2021-05-29_12-03-17.zip
(615.09 KiB) Downloaded 66 times
report_E415F6F6E589-0410203112_2021-05-29_11-52-55.zip
(611.81 KiB) Downloaded 76 times
report_E415F6F6E589-0410203112_2021-05-29_11-51-54.zip
(614.03 KiB) Downloaded 71 times
report_E415F6F6E589-0410203112_2021-05-29_11-48-49.zip
(611.92 KiB) Downloaded 69 times
report_E415F6F6E589-0410203112_2021-05-29_11-46-44.zip
(623.98 KiB) Downloaded 72 times
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Gremlins

Post by martyscncgarage »

No need to post all the reports. Only a fresh one and maybe one from the previous version.
Did you do a FRESH install and hand copy in all your machine settings or did you restore from an older report?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Gmachine
Posts: 10
Joined: Fri May 29, 2020 11:52 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E415F6F6E589-0410203112
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Gremlins

Post by Gmachine »

After not finding anything wrong with my connections or wiring I moved forward with wiping cnc 12 and starting over with fresh install. Immediately after the installation and rehoming the machine I could tell it was working properly. I ran my machine for 4 hours on 6/19/21 with not problems. My guess is that a file was corrupted during installation causing my issues. In the future if someone has issues after an update. Tell them to reinstall the software before jumping to conclusions.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Gremlins

Post by martyscncgarage »

Gmachine wrote: Sun Jun 20, 2021 8:17 am After not finding anything wrong with my connections or wiring I moved forward with wiping cnc 12 and starting over with fresh install. Immediately after the installation and rehoming the machine I could tell it was working properly. I ran my machine for 4 hours on 6/19/21 with not problems. My guess is that a file was corrupted during installation causing my issues. In the future if someone has issues after an update. Tell them to reinstall the software before jumping to conclusions.
I recommend starting with a fresh cleaning install, using Wizard screen shots from the last installation. NOT using Restore Report from an older version if you are having trouble.

I hope your fresh install has helped
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply