Restoring report.zip to new acorn board (Resolved)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
LenelyWolf
Posts: 118
Joined: Sun Jan 17, 2021 3:13 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Restoring report.zip to new acorn board (Resolved)

Post by LenelyWolf »

First: will restoring report.zip restore all settings to new acorn board or do I have to go through any of bench tests like spindle bench test and other settings all over again?
Second: Will I have to do restore report.zip if only BBG is replaced for new one or the settings are stored on acorn card
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Restoring report.zip to new acorn board

Post by Gary Campbell »

1) Yes, IF the same version of software is installed

2) Yes AND you will need Centroid to generate a new license
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
LenelyWolf
Posts: 118
Joined: Sun Jan 17, 2021 3:13 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Restoring report.zip to new acorn board

Post by LenelyWolf »

Gary Campbell wrote: Sat May 15, 2021 10:29 am 1) Yes, IF the same version of software is installed

2) Yes AND you will need Centroid to generate a new license
Thanks… So no need to set anything when restoring either on new bbg or new acorn
Gary Campbell
Posts: 2164
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: Acorn 238
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Marquette, MI
Contact:

Re: Restoring report.zip to new acorn board

Post by Gary Campbell »

Follow the videos for a new install
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
LenelyWolf
Posts: 118
Joined: Sun Jan 17, 2021 3:13 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Restoring report.zip to new acorn board

Post by LenelyWolf »

Gary Campbell wrote: Sat May 15, 2021 2:12 pm Follow the videos for a new install
All done.. replaced new bbg and everything works as it should
Post Reply