CNC12 setup for machine bed?? Laguna Smartshop 2 Router

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Dangerfox.com
Posts: 3
Joined: Fri Feb 19, 2021 1:49 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 0035FF9127E6-0305214455
Location: Waco, TX
Contact:

CNC12 setup for machine bed?? Laguna Smartshop 2 Router

Post by Dangerfox.com »

We have just fully gutted our Laguna Smartshop 2 4x8 router and are up and running. Its AWESOME!! We love it.

Right now we are setting up our files to run off the material surface, this makes us have to reset Z zero every time we change materials. We use our machine in a professional manner and are cutting 7-15 sheets a day. This creates an issue with efficiency and also makes our Z cut depths erratic sometimes cutting deeper than we want into the spoil board.

How do we set up CNC12 to run z zero from the spoil board and run our files from machine bed instead of material surface?

Thanks in advance for your help!
cnckeith
Posts: 3302
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Re: CNC12 setup for machine bed?? Laguna Smartshop 2 Router

Post by cnckeith »

Please post a fresh report.zip and a few samples of your g-code files
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply