Acceleration settings question

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
mikeman20
Posts: 1
Joined: Tue Apr 13, 2021 3:31 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Acceleration settings question

Post by mikeman20 »

I've spent a ton of time reading, but I cant seem to find this, any help would be great:

Which velocity does the time 'acceleration' setting use for the axes accelerations? max rate? the cutting rate in the gcode?

Thanks for any info!

-Mike

Edit: I apparently never tried hovering over it to see if there was a popup tooltip, and there is.

For anyone with the same question, its the max rate.
Gary Campbell
Posts: 1503
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: Acorn 238
Location: Marquette, MI
Contact:

Re: Acceleration settings question

Post by Gary Campbell »

Max rate when doing rapids, feedrate during G1 execution
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Post Reply