Mike, his first post seems to indicate ether1616 is set to A0 and he is able to ping that address.Richards wrote: ↑Tue May 04, 2021 8:37 am Page 4 of the 1616 user guide shows that the IP address that you listed is not valid. Please verify that the address you are using is the address listed in the 1616 documentation. The address on my computer is 10.158.41.1. The computer's subnet mask is set to 255.255.255.0, which means that the computer can ONLY communicate with other devices in the range of 10.168.41.2 to 10.168.41.254. If I remember correctly, the Acorn's default address is 10.168.41.2 and the A0 address on the 1616 board is 10.168.41.3.
Do you have a photo of how you've connected your ethernet switch between your computer, the Acorn and the 1616 board? Also does the switch show both activity and connection LEDs for all three devices?
1616.JPG
You did bring something up that made me think.
He should go in and verify his ethernet adapter settings.
Follow this video carefully to verify your ethernet adapter is setup properly.
viewtopic.php?f=61&t=1451
Post a screen shot of the ethernet adapter settings.
Also, I second Mike's request, please post a picture of your Acorn, Ethernet Switch and Ether1616 setup. There should be only 3 connections on the switch, PC, Acorn and Ether1616.
Marty