3D Probe specs (Resolved)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Christian Wahl
Posts: 9
Joined: Sun Apr 12, 2020 5:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0479B7ABD46B-0319203088
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

3D Probe specs (Resolved)

Post by Christian Wahl »

hello Acorn friends

I'm going to buy a probe, and my question is what functions this must have.
I have the following options:
s-l500 probe.png
I have gone for a European supplier due to customs duties and taxes.
https://www.slavtec.eu/index.php/produc ... tip-kopia/

Best Regards Christian
Bridgeport J-head retrofit
Just for fun
Top
cnckeith
Posts: 7325
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: 3D Probe specs

Post by cnckeith »

https://www.centroidcnc.com/centroid_di ... _setup.pdf
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Top
Christian Wahl
Posts: 9
Joined: Sun Apr 12, 2020 5:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0479B7ABD46B-0319203088
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: 3D Probe specs

Post by Christian Wahl »

Thanks Keith
I knew I had seen this pdf somewhere in the forum, but could not find it again in the information jungle.
Bridgeport J-head retrofit
Just for fun
Top
cnckeith
Posts: 7325
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:
Contact cnckeith

Re: 3D Probe specs

Post by cnckeith »

no worries.. for future reference All Acorn documentation is located in the "All Acorn Documentation" thread here.

viewtopic.php?f=60&t=3397
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Top
Post Reply

Return to “Centroid Acorn CNC Controller”