vcp button help

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
antpdrake
Posts: 18
Joined: Sun Oct 15, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: B0D5CCFD5C69-0822170084
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

vcp button help

Post by antpdrake »

Hey,

i have just upgraded to router pro and i have been trying to figure out how to program the vcp buttons for a while now and im struggling.
i have read through the guides.

i just want the stock router buttons to work, specifically, "reset home", "park" and the "set wcs x y 0" "go to machine 0"and go to wcs xy0

are they like standard macro codes that someone could just to me and i paste in orrr?

whats the easiest way to do it?

see attached report if needed

thanks.
Attachments
report_B0D5CCFD5C69-0822170084_2021-04-14_11-25-47.zip
(695.5 KiB) Downloaded 72 times
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: vcp button help

Post by martyscncgarage »

antpdrake wrote: Tue Apr 13, 2021 11:36 pm Hey,

i have just upgraded to router pro and i have been trying to figure out how to program the vcp buttons for a while now and im struggling.
i have read through the guides.

i just want the stock router buttons to work, specifically, "reset home", "park" and the "set wcs x y 0" "go to machine 0"and go to wcs xy0

are they like standard macro codes that someone could just to me and i paste in orrr?

whats the easiest way to do it?

see attached report if needed

thanks.
The stock router buttons do work out of the box so to speak.
They work after you have reset, CNC12 software is on line, homed the machine, set your part zeros.

Can you take a video and upload it to YouTube, mark it unlisted and SHARE a link here so we can understand what is going on?

The Virtual Control panel can be customized, but it doesn't have to be to use it.
Manual:
viewtopic.php?f=60&t=1043

Video:
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: vcp button help

Post by cnckeith »

antpdrake wrote: Tue Apr 13, 2021 11:36 pm Hey,

i have just upgraded to router pro and i have been trying to figure out how to program the vcp buttons for a while now and im struggling.
i have read through the guides.

i just want the stock router buttons to work, specifically, "reset home", "park" and the "set wcs x y 0" "go to machine 0"and go to wcs xy0

are they like standard macro codes that someone could just to me and i paste in orrr?

whats the easiest way to do it?

see attached report if needed

thanks.
like marty says these work as is.."reset home", "park" and the "set wcs x y 0" "go to machine 0"and go to wcs xy0 sounds like you haven't home'd the machine out yet.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
antpdrake
Posts: 18
Joined: Sun Oct 15, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: B0D5CCFD5C69-0822170084
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Re: vcp button help

Post by antpdrake »

Reset home was done when Cnc12 booted up, if that's what you mean?

See this video


Thanks
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: vcp button help

Post by martyscncgarage »

Did you happen to upgrade to 4.64 by restoring a an old report over the top of the new install?
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: vcp button help

Post by cnckeith »

hi, your problems are from the use of a Mill report.zip with the Router software.

Router CNC12 installation instructions start on page 3 here.
https://www.centroidcnc.com/centroid_di ... ctions.pdf

DO NOT use the "Restore report" method , do not use a Mill (or Lathe) “report.zip” file with Router CNC12. In future versions of CNC12 Router, updating will be a simple matter of using ‘restore report’ but for this very first version (v4.64) Router needs to be setup with the Wizard as a clean fresh install (not using the restore report method).
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
antpdrake
Posts: 18
Joined: Sun Oct 15, 2017 10:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: B0D5CCFD5C69-0822170084
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No

Re: vcp button help

Post by antpdrake »

ahhh yes, oops.

do i need to uninstall and start again?

thanks
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: vcp button help

Post by martyscncgarage »

antpdrake wrote: Tue Apr 20, 2021 3:38 am ahhh yes, oops.

do i need to uninstall and start again?

thanks
Take screen shots of your Wizard pages using windows snipping tool. The uninstall CNC12. Delete the directory. Then install a fresh copy of CNC12. Then using your screen shots, hand key in the settings in each wizard screen.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply