(open) Error saving WCS information

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: (open) Error saving WCS information

Post by tblough »

How did you change to a different PC? With a full, new install of CNC12, or by copying the old CNC 12 installation or restoring from a report?

Try this in a different PC starting with a full install of CNC 12 using the Wizard screens to enter your configuration information. Do not copy any files from the other PC - including reports.
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Gansen911
Posts: 21
Joined: Sun Apr 24, 2022 7:56 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: (open) Error saving WCS information

Post by Gansen911 »

Yes I did restore the report. I did delete the cncm.wcs when I did that.

I will take pictures of all my pages in the wizard and uninstall cnc12 and delete the cncm folder. Then reinstall cnc12 and not restore the report. Enter in all my settings in the wizard and try again.
avp
Posts: 124
Joined: Fri Aug 13, 2021 12:25 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E062346A1C67-0716214939
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: New York

Re: (open) Error saving WCS information

Post by avp »

Let me know if that route works for you. I have a similar issue with the error saving tool offset library file.
Bill
Gansen911
Posts: 21
Joined: Sun Apr 24, 2022 7:56 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: (open) Error saving WCS information

Post by Gansen911 »

Did not work. I unstilled CNC12, deleted the CNCM folder, reinstalled form the centroid web site, set everything up in the wizard, and seeing the same types of problems. I am now not convinced I have a corrupted hard drive on my other PC as of now. Where do I go from here? Could the problem be the acorn board itself since this has been a problem from day one? Attached is my new report.
cnckeith
Posts: 7166
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: (open) Error saving WCS information

Post by cnckeith »

please post fresh report.zip and a copy of the g code program (if you are getting errors when loading/running the g code program) thanks

fyi...Acorn hardware would not cause this issue.

Windows not allowing a folder or file to be written (or read) would.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Gansen911
Posts: 21
Joined: Sun Apr 24, 2022 7:56 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: (open) Error saving WCS information

Post by Gansen911 »

Attached is my report after the new fresh install on my other PC and a g code from fusion 360 using the centroid post processer
Attachments
Spot drill.nc
(429 Bytes) Downloaded 35 times
Drill.nc
(421 Bytes) Downloaded 37 times
contour.nc
(1.94 KiB) Downloaded 36 times
clearing.nc
(49.69 KiB) Downloaded 35 times
report_E06234635550-0203225615_2022-05-22_11-43-30.zip
(618.24 KiB) Downloaded 39 times
Allin1Chris
Posts: 132
Joined: Wed Jul 31, 2019 12:53 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes

Re: (open) Error saving WCS information

Post by Allin1Chris »

Gansen,

Did you install the software off of a USB Drive by Chance? If so, ensure to copy the executable to your desktop or somewhere on your computer first, then run the installer.

Have you tried Running the CNC12 software in administrator mode ? (Right click the cnc12 icon on your desktop and click "Run as Administrator"). Does this resolve the issue ?
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)

Centroid PLC Tutorial Videos
Gansen911
Posts: 21
Joined: Sun Apr 24, 2022 7:56 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: (open) Error saving WCS information

Post by Gansen911 »

I installed it right from the centroid page. I am running it as a administrator and seeing the same result.
avp
Posts: 124
Joined: Fri Aug 13, 2021 12:25 pm
Acorn CNC Controller: Yes
Plasma CNC Controller: No
AcornSix CNC Controller: No
Allin1DC CNC Controller: No
Hickory CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: E062346A1C67-0716214939
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: New York

Re: (open) Error saving WCS information

Post by avp »

Hello,
Has there been a solution to this issue? curious about it.
Thank you
Bill
Gansen911
Posts: 21
Joined: Sun Apr 24, 2022 7:56 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: (open) Error saving WCS information

Post by Gansen911 »

Unfortunately this problem is not fixed and still do not have answers.
Post Reply