Feedrate overide stops working after a tool change (Resolved)

[martyscncgarage]

Ok I got it working by moving m108 before the code that sets the tool # in spindel in the m6 macro.

WInston,
Is your ATC working? You have another thread going about issues with your ATC.
You should really try and keep everything together in one build thread.

If your ATC is working correctly great. If it is not, you should get the ATC issues ironed out before moving forward with running programs.

Marty

Yes it’s working as far as know never ran one be for . this issue I thought had to do with the other program .Some times you have to run a program to find problems . Like I have said I am not a programmer I barely know g code nothing like in the atc macro. I am sorry if I am causing problems.

Ok, so in another thread about your ATC, is that resolved as well? ATC is working ok?
I want to mark your issues as resolved.
No problem, it gets confusing when you start multiple threads. Many of us are helping others and we can't remember who has what, what their problems were.

Let me know if this thread and the ATC thread of yours can be marked as resolved.
Marty

[WINSTON]

This one is resolved