Help Tool turret

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
Viani86
Posts: 5
Joined: Sun Oct 14, 2018 5:52 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Help Tool turret

Post by Viani86 »

Hi
I would like to change the tool tower inputs, (inputs 1,2,3,4) are for 24 COM signals.
And my encoder bit outputs (1,2,3,4 is 24 +)
could someone guide me?
thank you so much
Top
martyscncgarage
Posts: 9914
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Help Tool turret

Post by martyscncgarage »

Viani86 wrote: ↑Sun Apr 11, 2021 7:10 pm Hi
I would like to change the tool tower inputs, (inputs 1,2,3,4) are for 24 COM signals.
And my encoder bit outputs (1,2,3,4 is 24 +)
could someone guide me?
thank you so much
You are NOT providing enough information for us to give you good suggestions
Please follow this post
Need MUCH more detail about the turret, make and model, does it rotate one direction only, bi-directional, what turns it,what kind of machine pictures etc.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Top
Post Reply

Return to “Centroid Acorn CNC Controller”