AXYZ 4004 Retrofit

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

mrp192
Posts: 95
Joined: Sat Oct 10, 2020 4:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 3699, 3788
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: AXYZ 4004 Retrofit

Post by mrp192 »

martyscncgarage wrote: Fri Apr 09, 2021 10:31 am
mrp192 wrote: Fri Apr 09, 2021 9:18 am Got the machine homing, and all 3 axis moving and calibrated. I have the steppers set to 4K steps with that and both X and Y have less .001" backlash and from what I have tell the Z has no backlash.
Great! So we can mark this issue resolved then?
Marty
No Issue was trying to do a build page.
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: AXYZ 4004 Retrofit

Post by martyscncgarage »

mrp192 wrote: Fri Apr 09, 2021 4:36 pm
martyscncgarage wrote: Fri Apr 09, 2021 10:31 am
mrp192 wrote: Fri Apr 09, 2021 9:18 am Got the machine homing, and all 3 axis moving and calibrated. I have the steppers set to 4K steps with that and both X and Y have less .001" backlash and from what I have tell the Z has no backlash.
Great! So we can mark this issue resolved then?
Marty
No Issue was trying to do a build page.
Roger that...carry on with posting pics of the build!😁
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply