hi everyone
my concern is that when I load my gcode in cnc12, the card does not make me the first hole while my simulation in solidcam is ok no problem with the gcode I do not understand why.
this only happens for the first hole, all others are ok.
thank you for your help I put here a screenshot as well as the gcode.
first hole problem
Moderator: cnckeith
-
- Posts: 2
- Joined: Sun Dec 20, 2020 3:29 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: C147272
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
first hole problem
- Attachments
-
- P1.txt
- (12.46 KiB) Downloaded 72 times
-
- Posts: 7292
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: first hole problem
hi, its not in the g code , go back to your cad cam system and make sure you selected all the holes.
and please always post a fresh report.zip file. thanks, k
and please always post a fresh report.zip file. thanks, k
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2
- Joined: Sun Dec 20, 2020 3:29 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: C147272
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: first hole problem
Thank you very much.
clear and precise answer as I like them, my problem is solved
clear and precise answer as I like them, my problem is solved
-
- Posts: 18
- Joined: Sat Jan 09, 2021 2:55 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 4119
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: first hole problem
I was just working through the same issue! Changing the Parameter worked. Thanks!