Hello everyone,
Steve from Wales UK here. I'm new to the forum and I'm considering purchasing an Acorn CNC and have a question that I cant find the answer to anywhere else.
Is it possible to have an external potentiometer for feed rate overide with the Acorn and if so how would I go about it.
Thanks in advance.
External Potentiometer for Feed Rate Overide
Moderator: cnckeith
-
- Posts: 7334
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: External Potentiometer for Feed Rate Overide
not on Acorn (yes on oak and allin1dc and mpu11 systems) that functionality is on the Wireless MPG. you can turn the big MPG wheel and it will adjust the feedrate overide just like a external potentiometer.
https://www.centroidcnc.com/centroid_di ... ndant.html
https://www.centroidcnc.com/centroid_di ... ndant.html
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 2
- Joined: Thu Mar 25, 2021 1:17 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: No
- CNC11: No
- CPU10 or CPU7: No
Re: External Potentiometer for Feed Rate Overide
Thanks for the quick reply