Centroid Community CNC Support Forum

noel-nogal wrote:i am trying to find the arrow esc button on the left bottom corner of the screen, it don't shows up, do you know where i can find it?

Machine Parameter 154 = 1

thank you.

i got it now, i have to read more carefully the user manual. great day

noel-nogal wrote: ↑Wed Mar 31, 2021 7:54 pm thank you.

i got it now, i have to read more carefully the user manual. great day

Are you up and running? Your questions answered?
Marty

yes my question was answered yesterday, i have already fix it thanks Marty

i have an old cnc router ,morbidelli author 504, with yaskawa servopacks drives CACR-SR series, they are analog input, is there any way to use the acorn controller with them?

noel-nogal wrote: ↑Fri Apr 02, 2021 12:09 am i have an old cnc router ,morbidelli author 504, with yaskawa servopacks drives CACR-SR series, they are analog input, is there any way to use the acorn controller with them?

Acorn ONLY outputs Step and Direction. If those Yaskawa drives won't take step and direction no, they won't work.
However, if you post a LINK to the manual for your particular drives, we can look to see if they can take step and direction.

OAK *MAY* be a better solution.

good morning.

I have unpluged the ethernet cable for connecting internet, then i change the ip address for my modem, now i connected back the acorn ethernet cable back but i can't configure the ip address for it.

noel-nogal wrote: ↑Thu Apr 08, 2021 11:12 am good morning.

I have unpluged the ethernet cable for connecting internet, then i change the ip address for my modem, now i connected back the acorn ethernet cable back but i can't configure the ip address for it.

The ethernet port on the PC is addressed to communicate with Acorn. Do not change it once configured. Buy a USB wifi modem for internet connection.

Follow this post to fix it
viewtopic.php?f=61&t=1451

fixed, thank you very much.