Acorn controller card question

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

cncsnw
Posts: 1988
Joined: Wed Mar 24, 2010 5:48 pm

Re: Acorn controller card question

Post by cncsnw »

noel-nogal wrote:i am trying to find the arrow esc button on the left bottom corner of the screen, it don't shows up, do you know where i can find it?
Machine Parameter 154 = 1
noel-nogal
Posts: 28
Joined: Sat Feb 20, 2021 12:37 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Acorn controller card question

Post by noel-nogal »

thank you.

i got it now, i have to read more carefully the user manual. great day
martyscncgarage
Posts: 7962
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Acorn controller card question

Post by martyscncgarage »

noel-nogal wrote: Wed Mar 31, 2021 7:54 pm thank you.

i got it now, i have to read more carefully the user manual. great day
Are you up and running? Your questions answered?
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
noel-nogal
Posts: 28
Joined: Sat Feb 20, 2021 12:37 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Acorn controller card question

Post by noel-nogal »

yes my question was answered yesterday, i have already fix it thanks Marty
noel-nogal
Posts: 28
Joined: Sat Feb 20, 2021 12:37 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Acorn controller card question

Post by noel-nogal »

i have an old cnc router ,morbidelli author 504, with yaskawa servopacks drives CACR-SR series, they are analog input, is there any way to use the acorn controller with them?
martyscncgarage
Posts: 7962
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Acorn controller card question

Post by martyscncgarage »

noel-nogal wrote: Fri Apr 02, 2021 12:09 am i have an old cnc router ,morbidelli author 504, with yaskawa servopacks drives CACR-SR series, they are analog input, is there any way to use the acorn controller with them?
Acorn ONLY outputs Step and Direction. If those Yaskawa drives won't take step and direction no, they won't work.
However, if you post a LINK to the manual for your particular drives, we can look to see if they can take step and direction.

OAK *MAY* be a better solution.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
noel-nogal
Posts: 28
Joined: Sat Feb 20, 2021 12:37 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Acorn controller card question

Post by noel-nogal »

good morning.

I have unpluged the ethernet cable for connecting internet, then i change the ip address for my modem, now i connected back the acorn ethernet cable back but i can't configure the ip address for it.
martyscncgarage
Posts: 7962
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Acorn controller card question

Post by martyscncgarage »

noel-nogal wrote: Thu Apr 08, 2021 11:12 am good morning.

I have unpluged the ethernet cable for connecting internet, then i change the ip address for my modem, now i connected back the acorn ethernet cable back but i can't configure the ip address for it.
The ethernet port on the PC is addressed to communicate with Acorn. Do not change it once configured. Buy a USB wifi modem for internet connection.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
martyscncgarage
Posts: 7962
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: Acorn controller card question

Post by martyscncgarage »

Follow this post to fix it
viewtopic.php?f=61&t=1451
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
noel-nogal
Posts: 28
Joined: Sat Feb 20, 2021 12:37 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Acorn controller card question

Post by noel-nogal »

fixed, thank you very much.
Post Reply