trying to patiently await the arrival of the Acorn kit i've ordered to upgrade my CNC Router, but want to get started on my electronics enclosure planning and build while the shipping company takes their time.
Any know where I can find generic models of the parts with enough detail information for planning mounting option?
Thanks
K
Place Holder Cad models for Acorn kit parts
Moderator: cnckeith
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Place Holder Cad models for Acorn kit parts
Acorn spec manual with dimensions can be found here:swk wrote: ↑Fri Mar 19, 2021 2:16 pm trying to patiently await the arrival of the Acorn kit i've ordered to upgrade my CNC Router, but want to get started on my electronics enclosure planning and build while the shipping company takes their time.
Any know where I can find generic models of the parts with enough detail information for planning mounting option?
Thanks
K
Make cardboard cutout to size for it and the relay board.
https://centroidcnc.com/centroid_diy/do ... manual.pdf
I assume you have your motor drives, power supplies etc...
Patience is a virtue....(of which sometimes I have little of! )
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 3
- Joined: Tue Mar 16, 2021 5:25 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Place Holder Cad models for Acorn kit parts
Thanks!martyscncgarage wrote: ↑Fri Mar 19, 2021 3:15 pm
I assume you have your motor drives, power supplies etc...
Patience is a virtue....(of which sometimes I have little of! )
yes I have motor drives, PSUs, a pile of DIN rail and wire management.
Trying to get things layed out in CAD so I know if I need to fab any parts.
I'll post some project pix.
and Patience?? whats that?
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Place Holder Cad models for Acorn kit parts
Be sure to start a build thread of your project. Post pictures of it and how you get along.
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ