More questions about Acorn and pulling the trigger today

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
martyscncgarage
Posts: 9914
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: More questions about Acorn and pulling the trigger today

Post by martyscncgarage »

Odd, I wonder if it was a return. The kits are tested and sealed at Centroid.....
As long as it works is all that matters.
Tinker around with it on the bench, get your drives and motors and set them up one at a time on the bench.
When asking for help, please be sure to post specifics, what drives/motors you are using, links to manuals, and always post a fresh report.
F7 Utilities, F7 Create Report

Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Top
Post Reply

Return to “Centroid Acorn CNC Controller”