We are just guessing without GOOD information.
PLEASE Follow this post:viewtopic.php?f=60&t=1043
Please take a look at this one: viewtopic.php?f=60&t=3539
We cannot "SEE" what you "SEE"
As Keith mentioned, a FRESH Report is required every time you ask for help. Every time you make a change in the Wizard or CNC12 it is captured in the report. The Report file has all your machine parameters and settings. It is CRUCIAL you save a copy of your working machine's REPORT and even a good idea to keep a copy of the working CNCM or CNCT directory along with any license files ONTO A USB Stick and store them OFF the CNC12 PC. This will help you quickly get back up and running in the event of a PC crash, hard disk failure etc.
More details and information you provide will get you: one a response, and two, better suggestions on how to help.
Marty
Shopbot PRT - fresh install CNC12
Moderator: cnckeith
-
- Posts: 9912
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Shopbot PRT - fresh install CNC12
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 96
- Joined: Mon Oct 15, 2018 10:13 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA78F172-1129181385
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Atlanta GA
Re: Shopbot PRT - fresh install CNC12
Yes to everything these guys said.
A thumb drive with a report on it could've saved me a little time here.
The good news is I was able to pull up my build threads here and find most of what I needed for my settings. I had never posted any reports previously, so I did not have any posted in my build threads. But there's another reason to post those reports.
A thumb drive with a report on it could've saved me a little time here.
The good news is I was able to pull up my build threads here and find most of what I needed for my settings. I had never posted any reports previously, so I did not have any posted in my build threads. But there's another reason to post those reports.
-
- Posts: 9912
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Shopbot PRT - fresh install CNC12
Are you back up and running?robtown wrote: ↑Fri Apr 02, 2021 9:22 am Yes to everything these guys said.
A thumb drive with a report on it could've saved me a little time here.
The good news is I was able to pull up my build threads here and find most of what I needed for my settings. I had never posted any reports previously, so I did not have any posted in my build threads. But there's another reason to post those reports.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 96
- Joined: Mon Oct 15, 2018 10:13 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA78F172-1129181385
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
- Location: Atlanta GA
Re: Shopbot PRT - fresh install CNC12
Yes.
I haven’t looked at my zzero plate yet (M6) but I’m running and homing now.
I haven’t yet cut anything, but based on what I’m seeing it all seems to be good.
I haven’t looked at my zzero plate yet (M6) but I’m running and homing now.
I haven’t yet cut anything, but based on what I’m seeing it all seems to be good.