I am configuring for 5 motors on 4 axis ( X,Y,Z,&A) slaving the Y axis and squaring manually. I previously had two 4-channel relay boards to daisy chain the HLFB to the one 'DriveOK' input on the Acorn.
My Motor Configurations are:
- X Axis
- Y Axis
- Y-Slave Axis
- Z-Axis
- A-Axis
The inputs I can select from the Wizard are :
- Axis 1 DriveOK
- Axis 2 DriveOK
- Axis 3 DriveOK
- Axis 4 DriveOK
Will the Wizard allow an additional 'Axis 2 Drive OK' for the Axis 2 slaved motor to be configured or will I need to edit other machine input settings or the PLC source file for the Y-Slave motor DriveOK signal?
Thanks,
C