Pulse in setup

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

tblough
Posts: 3072
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Boston, MA
Contact:

Re: Pulse in setup

Post by tblough »

martyscncgarage wrote: Mon Apr 12, 2021 11:22 am Go into MDI and do a G0A360 the rotary axis should turn one full revolution
Guessing from the photo of your rotary table, you should have your A-axis configured so that the G0 A360 command causes the table to rotate clockwise when viewed from the chuck side.

viewtopic.php?f=64&t=3638
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
usinart
Posts: 78
Joined: Fri Dec 25, 2020 2:06 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Pulse in setup

Post by usinart »

Thanks Marty
As mention earlier without limit switch on the A axes I should modified a cncn.hom or something like that .
I did by adding m26/ A
But each time I making some modification and re home the g92 a.... it adding by it self .
How to get of those because no limit switch on the A axe.

Thanks
Alain
Attachments
report_E415F6F138CC-1119204064_2021-04-19_16-21-11.zip
(639.75 KiB) Downloaded 70 times
IMG_2219.JPG
martyscncgarage
Posts: 9912
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Pulse in setup

Post by martyscncgarage »

usinaet wrote: Mon Apr 19, 2021 4:26 pm Thanks Marty
As mention earlier without limit switch on the A axes I should modified a cncn.hom or something like that .
I did by adding m26/ A
But each time I making some modification and re home the g92 a.... it adding by it self .
How to get of those because no limit switch on the A axe.

Thanks
Alain
You need to go into the Wizard, homing and travel and check the I will create my own Home file do not OVERWRITE the .hom file.
Then when you make changes in the Wizard, it will not create the .hom file (It does that unless you tick the radio button not to overwrite it)
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply