Keith, I think Scott's suggestion here is a strong one. If the M91/M92 values need to be written to CNC12 regardless of system generated or custom cncm.hom file...then why gray out the boxes when custom homing is selected? Make it clear that those values need to be set regardless of homing file choice. Right now, the (obviously incorrect) assumption I made is that if the M91/M92 dropdowns are greyed out, they are irrelevant and/or can not be edited because I have selected a custom homing file.
Make sense?
Gerald
v4.62 Router: Issue with Y axis homing since upgrade from 4.20.1 Mill <answered>
Moderator: cnckeith
-
- Posts: 90
- Joined: Mon Oct 15, 2018 7:37 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No