Eric gives us an update on his Acorn ATC setup.

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
cnckeith
Posts: 3114
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Contact:

Eric gives us an update on his Acorn ATC setup.

Post by cnckeith »

Eric gives us an update on his Acorn ATC setup. Nice work!

When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043

Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.

(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
cut2cut
Posts: 69
Joined: Sat Dec 23, 2017 3:02 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 38D26950ABAB-1221170383

Re: Eric gives us an update on his Acorn ATC setup.

Post by cut2cut »

awesome !
KJNC
Posts: 6
Joined: Tue Dec 22, 2020 1:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 0035FF8A2978-1009203821-MPU12-System

Re: Eric gives us an update on his Acorn ATC setup.

Post by KJNC »

This is very nice to hear.
With ATCs becoming more affordable and this sort of documentation I could foresee myself buying one someday.
Post Reply