KP-1 Probe Stuck Tripped <resolved>

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 7523
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
CNC Control System Serial Number: none
Location: Mesa, AZ

Re: KP-1 Probe Stuck Tripped

Post by martyscncgarage »

jpmsteadi wrote: Sat Feb 20, 2021 4:06 pm Soldered the lead back onto the 3.5mm plug. Works perfectly again.

Thanks for help Marty!
Glad to hear you are up and running.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply