Creating/renaiming inputs and outputs

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
kroe
Posts: 1
Joined: Wed Feb 17, 2021 6:12 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Creating/renaiming inputs and outputs

Post by kroe »

Hello,
How would I go about creating custom input and output types in which I could use in the Mill CNC control configuration wizard?
Top
martyscncgarage
Posts: 9914
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Creating/renaiming inputs and outputs

Post by martyscncgarage »

kroe wrote: ↑Thu Feb 18, 2021 10:44 am Hello,
How would I go about creating custom input and output types in which I could use in the Mill CNC control configuration wizard?
That is part of the software development. You can certainly not use the Wizard and customize the PLC.

Why don't you post what your end goal is.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Top
Post Reply

Return to “Centroid Acorn CNC Controller”