Hi, just got my acorn up and running on a Multicam 5x10 router table with leadshine hybrid steppers. X, Y , and Z axis are setup configured and running. Vfd using the analog 0-10v for rpm is running.
Very smooth transition so far. Truly seems like a rock sold and stable setup.
I am at the point of setting up my rack/ finger style ATC. I made a few small mods to the macro floating around and followed the directions.
When requesting a tool change I get a waiting for input #32 (m6).
Acorn ATC input#32 problem <filename typo, resolved.>
Moderator: cnckeith
-
alexgr8
- Posts: 3
- Joined: Tue Feb 02, 2021 6:20 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Acorn ATC input#32 problem <filename typo, resolved.>
- Attachments
-
- report_E415F6F66756-0206214327_2021-02-17_11-15-10.zip
- Report
- (813.52 KiB) Downloaded 83 times
-
Allin1Chris
- Posts: 134
- Joined: Wed Jul 31, 2019 12:53 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
Re: Acorn ATC input#32 problem
Hi Alexgr8,
Looking at your report, your m6 macro seems to be named "mfunc6.mac.mac".
Rename your m6 macro file to "mfunc6" without the .mac in the name.
Looking at your report, your m6 macro seems to be named "mfunc6.mac.mac".
Rename your m6 macro file to "mfunc6" without the .mac in the name.
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Centroid PLC Tutorial Videos
-
martyscncgarage
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Acorn ATC input#32 problem
Good old Windows....
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
Re: Acorn ATC input#32 problem
You can tell Windows to always show you the whole filename. Doing so will save a lot of headaches.
See viewtopic.php?f=64&t=4196&p=33895 and scroll down a page or two for instructions.
See viewtopic.php?f=64&t=4196&p=33895 and scroll down a page or two for instructions.
-
alexgr8
- Posts: 3
- Joined: Tue Feb 02, 2021 6:20 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Acorn ATC input#32 problem
Awesome. Thank you that did it. Now the fun begins to dial it in.