I am having some issues with the boring function in Mill and need to edit/tweak my post processor. I recall having seen a document (I think) that gives information on post processor requirements for different functions. However, looking through the documentation thread and the stuff I have downloaded, I can't find it.
Anybody know off hand where that information is?
CNC12 Post Processor requirements
Moderator: cnckeith
Re: CNC12 Post Processor requirements
I have some information here:
http://www.cncsnw.com/PostProcessorsMill.htm
For specifics on G85, G89 and G76 syntax, see the Centroid M-Series Operator's Manual.
http://www.cncsnw.com/PostProcessorsMill.htm
For specifics on G85, G89 and G76 syntax, see the Centroid M-Series Operator's Manual.
-
- Posts: 7287
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: CNC12 Post Processor requirements
please look at the CNC12 operator manual(s) great examples on how each G M code works etc..
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html