Page 12 of 14
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Mon Dec 27, 2021 6:46 pm
by tuffduck
Has anyone tested this yet?
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Mon Dec 27, 2021 7:05 pm
by martyscncgarage
tuffduck wrote: ↑ Mon Dec 27, 2021 6:46 pm
Has anyone tested this yet?
Tested what exactly? I did a complete build thread and videos on C86ACCP and Clearpath on the Syil X4. Worked great.
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Mon Dec 27, 2021 9:42 pm
by Gary Campbell
I shipped a ClearPath system with C86ACCP in December. Customer is happy with how his machine runs. I wired it as per the Centroid doc and the customer connected his motors as per the C86ACCP doc.
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Mon Dec 27, 2021 11:05 pm
by Sword
I think he's referencing the 3D printed bracket from a page or so back, but I could be wrong. Looked back for a bit of context.
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Wed Dec 29, 2021 2:18 pm
by tuffduck
Yes, I am asking about the 3D Printed bracket.
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Wed Dec 29, 2021 3:39 pm
by beevo
I designed and have printed one, here is my bracket.
http://www.beevo.org/MetalWorking/Dyna% ... 14_std.jpg
Beevo
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Wed Dec 29, 2021 9:29 pm
by beevo
Anyone who is interested in the .stl file should contact me off list. My earlier post was from work and I did not have the file with me and this site will not allow the extension to be uploaded.
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Mon Jan 17, 2022 11:02 pm
by tuffduck
Marty,
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Mon Jan 17, 2022 11:24 pm
by martyscncgarage
tuffduck wrote: ↑ Mon Jan 17, 2022 11:02 pm
Marty,
Where did you get the coupling that is in your video? Thanks
Which coupling are you referring to? Which video at what time in the video....been awhile since I did that series....
Marty
Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn
Posted: Mon Jan 17, 2022 11:54 pm
by tuffduck
VIDEO
