New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

ballsop123
Posts: 16
Joined: Tue Sep 18, 2018 5:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by ballsop123 »

Here is an STL file you can run .... Test fit and send me the changes we need to add or make....

Holes in lower mount are .150 " thru and the Side Board holes are made for M2.5 tap drill size...

Let me know how you make out with this.

Brian
Attachments
Bracket 1 First Run.zip
(298.75 KiB) Downloaded 196 times
LucidCnC
Posts: 3
Joined: Sun Apr 26, 2020 10:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0C1C5713AC80-0526203339
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by LucidCnC »

I wasn't able to load your file to slice?
ballsop123
Posts: 16
Joined: Tue Sep 18, 2018 5:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by ballsop123 »

What other format will you system take ?
snortwheeze
Posts: 8
Joined: Thu Jan 21, 2021 10:39 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 4230
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by snortwheeze »

I just downloaded it today. It’ll be this weekend before I can take my acorn board out of service to mount this mount.
ballsop123
Posts: 16
Joined: Tue Sep 18, 2018 5:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by ballsop123 »

How did you make out with the bracket mounting ? Assume some changes may be needed ? Let me know if you can... Thanks Brian
Custom Creations
Posts: 3
Joined: Sun Aug 01, 2021 3:27 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF9B30A3-0322214535
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by Custom Creations »

ballsop123 wrote: Wed Aug 18, 2021 12:13 am Well ... Here is a bracket .... First kick at the can so to speak ...

Attached is a Jpeg screen capture ... Take a look and let me know what you think ....

I don't have all the pieces built yet on the CNC4PC board but the dimensions of the board and the hole locations are per the drawing sent to me...

If you like it or have suggestions let me know and I can tweak it some more.

Brian



Bracket 1.jpg


Bracket 2.jpg
I would suggest to at least make these 2 surfaces flat so it can lay on the printer bed.
Attachments
surfaces.PNG
surface.PNG
ballsop123
Posts: 16
Joined: Tue Sep 18, 2018 5:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by ballsop123 »

Here is an updated STL file with the extended pads removed per you sketch sent to me...

Let me know how it worked out for you....

Thanks
Bracket 1 Second Run.zip
(280.02 KiB) Downloaded 215 times
Custom Creations
Posts: 3
Joined: Sun Aug 01, 2021 3:27 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 0035FF9B30A3-0322214535
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by Custom Creations »

I can at least confirm that the brace mounts to the Acorn. For the fitment of the ACCP? Well, I forgot I changed my order to the C86ACORN instead for my setup :/
ballsop123
Posts: 16
Joined: Tue Sep 18, 2018 5:48 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by ballsop123 »

I have the Acorn Board already ... I will buy one of the C86A boards and 3D print one for myself to check fitment ....

Stay tuned for the fitment report ...
beevo
Posts: 34
Joined: Wed Jul 26, 2017 11:10 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC11: Yes
CPU10 or CPU7: No
Location: Tempe, AZ
Contact:

Re: New Build: SYIL X4 CNC Mill, Clearpath SDSK, C86ACCP & Centroid Acorn

Post by beevo »

Got a loose Acorn Board you could loan me to do this?

Beevo
Beevo (aka Bill VanOrden)
Tempe, AZ
Post Reply