E Stop (Resolved)
Moderator: cnckeith
-
- Posts: 31
- Joined: Sun Dec 27, 2020 11:14 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 4063
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
E Stop (Resolved)
I completed the bench test, then hooked the E stop to the Acorn, it works fine on the Acorn with E stop reset I have a green led on input 8 and when depressed led turns red like Keiths video. But on the cncpc the function is inverted. With E stop depressed the PC shows reset, and when reset it shows tripped. The E stop has N C contacts.
- Attachments
-
- report_E415F6F30A3E-1119204063_2021-02-03_11-40-40.zip
- (285.91 KiB) Downloaded 107 times
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: E Stop
Show screen shot of the Alt i diagnostic screen please.blksmth wrote: ↑Wed Feb 03, 2021 3:47 pm I completed the bench test, then hooked the E stop to the Acorn, it works fine on the Acorn with E stop reset I have a green led on input 8 and when depressed led turns red like Keiths video. But on the cncpc the function is inverted. With E stop depressed the PC shows reset, and when reset it shows tripped. The E stop has N C contacts.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 31
- Joined: Sun Dec 27, 2020 11:14 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 4063
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: E Stop
The first screen shot is taken with the E stop reset. The second screen shot is with the E stop tripped mashed in. I need to figure how to add screen shot to to this reply.
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: E Stop
Go full editor and preview.
Click on the attachments tab under the text box. Point it to your files.
Click on the attachments tab under the text box. Point it to your files.
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: E Stop
Your input is inverted. Go into the Wizard and click on the red LED next to ESTOP input 8
It will change to green.
Right now the control thinks you have a NORMALLY OPEN switch
It will change to green.
Right now the control thinks you have a NORMALLY OPEN switch
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 31
- Joined: Sun Dec 27, 2020 11:14 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 4063
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: E Stop (resolved)
Thanks its correct now. I thought I looked at that several times but didn't catch it. Roy