juda,
hello. please post a fresh report.zip and create a new post in the main Acorn support forum and we will help. thanks keith
Acorn CNC12 Mill, Router, and Lathe v4.62 has been released!
Moderator: cnckeith
-
cnckeith
- Posts: 3117
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- CNC Control System Serial Number: none
- Contact:
Re: Acorn CNC12 Mill, Router, and Lathe v4.62 has been released!
When requesting support READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
Please ALWAYS post a FRESH report. To make a report: https://www.youtube.com/watch?v=Ecvg0VJp1oQ.
(We pride ourselves on providing timely solid technical support but, without good information we may not be able to help and/or reply until such information is posted.)
-
Juda
- Posts: 4
- Joined: Sun Jan 05, 2020 1:31 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- MPU11 & GPIO4D -w/ 3rd Party Drives: No
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- CNC Control System Serial Number: ok 375
Re: Acorn CNC12 Mill, Router, and Lathe v4.62 has been released!
Ok keith
As soon as I do I send them to you
Thank you.
As soon as I do I send them to you
Thank you.