Aux Keys 13 to 16 - Am I referring to a wrong document?

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
nandkishork59
Posts: 35
Joined: Mon Nov 23, 2020 9:09 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Aux Keys 13 to 16 - Am I referring to a wrong document?

Post by nandkishork59 »

Hello
On the Acorn VCP we have 6 columns and 10 rows. The earlier version had 5 columns which I have never used.
For the new VCP we have 16 Aux keys against the 12 Aux keys in earlier version.
In the M400 & M39 Operator's manual I am referring to, the 12 related parameters are explained as depicted in the picture below.
I am looking for the 'parameter numbers' for aux keys 13 to 16.
Am I referring to a correct document?
rgds
Attachments
Capture3.JPG
swissi
Posts: 573
Joined: Wed Aug 29, 2018 11:15 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 985DADEB24D5-0309180716
DC3IOB: No
CNC11: No
CPU10 or CPU7: No

Re: Aux Keys 13 to 16 - Am I referring to a wrong document?

Post by swissi »

nandkishork59 wrote: Thu Jan 21, 2021 9:44 pm Hello
On the Acorn VCP we have 6 columns and 10 rows. The earlier version had 5 columns which I have never used.
For the new VCP we have 16 Aux keys against the 12 Aux keys in earlier version.
In the M400 & M39 Operator's manual I am referring to, the 12 related parameters are explained as depicted in the picture below.
I am looking for the 'parameter numbers' for aux keys 13 to 16.
Am I referring to a correct document?
rgds
VCP 2.0 User Manual

-swissi
If you are using Fusion 360, check out my CNC12 specific Post Processor
If you are using a Touch Probe, Tool Touch Off Device or a Triple Corner Finder Plate, check out my ProbeApp

Contact me at swissi2000@gmail.com
cnckeith
Posts: 7164
Joined: Wed Mar 03, 2010 4:23 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
CNC Control System Serial Number: none
DC3IOB: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Contact:

Re: Aux Keys 13 to 16 - Am I referring to a wrong document?

Post by cnckeith »

all Acorn documentation is here..

viewtopic.php?f=60&t=3397
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
Post Reply