Communication Errors-Travel Limits spontaneously changed "0" & other issues

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

martyscncgarage
Posts: 9914
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Communication Errors-Travel Limits spontaneously changed "0" & other issues

Post by martyscncgarage »

Caleb wrote: Fri Jan 29, 2021 3:38 pm I've just started having 944 mpu request resend and
946 pc resending errors after doing a bit of "maintenance" and running updates on my all in one lenovo, doesn't happen with the same setup including ethernet cable using another PC so I'm going to have a play with drivers.
May have to try that switch as the all in one works well for the particular setup.
Aggravating. I think I ran into that one myself on a Lenovo M92P Tiny. Next time it happens, I think I will roll back the Ethernet driver to an earlier version as a test.

Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Caleb
Posts: 73
Joined: Thu Dec 26, 2019 5:01 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 780473A2EE6C-1022192587
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No

Re: Communication Errors-Travel Limits spontaneously changed "0" & other issues

Post by Caleb »

Double checked drivers and it doesn't look like there has been update for quite some time so it probably wasn't a driver problem but I did get windows to do some more updates over the weekend and it's I had no errors testing it this morning.
martyscncgarage
Posts: 9914
Joined: Tue Mar 28, 2017 12:01 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: No
CNC Control System Serial Number: none
DC3IOB: No
CNC12: Yes
CNC11: Yes
CPU10 or CPU7: Yes
Location: Mesa, AZ

Re: Communication Errors-Travel Limits spontaneously changed "0" & other issues

Post by martyscncgarage »

Caleb wrote: Mon Feb 01, 2021 10:04 am Double checked drivers and it doesn't look like there has been update for quite some time so it probably want a driver fault but did get windows to do some more updates over the weekend and it's not getting the errors now.
Keep us posted.
Also post a current report...
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
Post Reply