Planning a new CNC installation on a PM-940V milling machine. Does anyone have recommendations on limit switches that they have had good luck with?
Thanks
Recommendation for Limit Switches
Moderator: cnckeith
-
- Posts: 369
- Joined: Thu Nov 15, 2018 10:07 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA7CBF8b-103011290
- DC3IOB: No
- CNC11: No
- CPU10 or CPU7: No
-
- Posts: 3100
- Joined: Tue Mar 22, 2016 10:03 am
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Boston, MA
- Contact:
Re: Recommendation for Limit Switches
You'll never have a problem with these: https://www.ebay.com/itm/New-EUCHNER-Li ... 3753779684
Cheers,
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
-
- Posts: 370
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: Recommendation for Limit Switches
+1
My Wabeco Mill also uses Euchner as factory standard equipment. Excellent product
My Wabeco Mill also uses Euchner as factory standard equipment. Excellent product
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"