Recommendation for Limit Switches

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
rdsmith24
Posts: 6
Joined: Sun Jan 03, 2021 9:33 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Recommendation for Limit Switches

Post by rdsmith24 »

Planning a new CNC installation on a PM-940V milling machine. Does anyone have recommendations on limit switches that they have had good luck with?

Thanks
CNCMaryland
Posts: 69
Joined: Thu Nov 15, 2018 10:07 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: F045DA7CBF8b-103011290

Re: Recommendation for Limit Switches

Post by CNCMaryland »

I've had excellent success with these:

https://www.automationdirect.com/adc/sh ... a-_12x27mm
tblough
Posts: 1340
Joined: Tue Mar 22, 2016 10:03 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: Yes
Oak CNC controller: Yes
MPU11 & GPIO4D -w/ 3rd Party Drives: Yes
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 100505
100327
102696
103432
7804732B977B-0624192192
Location: Boston, MA
Contact:

Re: Recommendation for Limit Switches

Post by tblough »

You'll never have a problem with these: https://www.ebay.com/itm/New-EUCHNER-Li ... 3753779684
Cheers,

Tom
Confidence is the feeling you have before you fully understand the situation.
I have CDO. It's like OCD, but the letters are where they should be.
Nigelo
Posts: 97
Joined: Tue Dec 11, 2018 4:03 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
Location: UK

Re: Recommendation for Limit Switches

Post by Nigelo »

+1
My Wabeco Mill also uses Euchner as factory standard equipment. Excellent product
Post Reply