Please critique my tool setter and touch plate schematic (Resolved)

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

ChrisAttebery
Posts: 78
Joined: Mon Dec 07, 2020 2:20 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
CNC Control System Serial Number: 4031
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
Location: Gilroy, CA
Contact:

Re: Please critique my tool setter and touch plate schematic

Post by ChrisAttebery »

Muzzer wrote: Wed Jan 13, 2021 2:10 pm Really you should add a noise decoupling cap directly across gate to source (ground)...
I dug through my parts box and found some 1.0mF tantalum caps that were specified for this exact purpose for these NFETs on a project form long ago. I added one between the gate and ground. I think it's all set now.
Post Reply