Windows Firewall (Resolved)
Moderator: cnckeith
-
- Posts: 58
- Joined: Mon Dec 14, 2020 5:41 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3859
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Windows Firewall (Resolved)
Can I turn my windows firewall back on after I have installed CNC12? Directions were a little confusing? Also it seems that if the fiewalls are on the ethernet will not communicate with the acorn?
-
- Posts: 368
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: Windows Firewall
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 368
- Joined: Tue Dec 11, 2018 4:03 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: F045DA80C8B8-0905181172
E415F6F70BC3-0318203049
98F07B91FC6B-0123236802 - DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: UK
Re: Windows Firewall
More specifically, use the forum search facility as I have just done. A search on "Firewall" would have brought up Keith's words of wisdom on the following link
viewtopic.php?f=60&t=3232&hilit=firewall
viewtopic.php?f=60&t=3232&hilit=firewall
Hope this helps
Nigel
"You can lead a horse to water but you cannot force it to drink"
Nigel
"You can lead a horse to water but you cannot force it to drink"
-
- Posts: 58
- Joined: Mon Dec 14, 2020 5:41 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3859
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Windows Firewall
thanks
-
- Posts: 9914
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: Windows Firewall
As a point of interest, if you have a CNC PC with all the Windows 10 updates, when you install CNC12 and then start it for the first time, Windows 10 will give you the opportunity to allow CNC12 through the firewall. Simply check the boxes and allow. Then its done.
Marty
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ
-
- Posts: 58
- Joined: Mon Dec 14, 2020 5:41 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 3859
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Windows Firewall
ok thanks