Questions about a VFD

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
ShawnM
Posts: 310
Joined: Fri May 24, 2019 8:34 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 7804734C6498-0401191832
Location: Clearwater, FL

Questions about a VFD

Post by ShawnM »

Has anyone heard of Bonfigliolo VFD's or have any experience with them? I have a retrofit coming up with an ACT 401-23A VFD and this one is new to me. A quick search of all the Centroid forums yields no hits. I fear I might be off on my own with this one. They are made in Germany, have an office in Kentucky and it is listed as a premium inverter in the catalog. It appears to have a +/-10v analog input on it. I'm searching for the actual manual for this unit know.

Here's a link to a PDF I found online with general info about their VFD's:

https://www.bonfiglioli.com/internation ... _r00_1.pdf
Post Reply