20% Feedrate button added to switch fast form 100% to 20% using the VCP.
Needs PLC editing for this button.
HowTo is here:
https://centroidcncforum.com/viewtopic. ... 4&start=20
Uwe
Show me your Custom VCP's!
Moderator: cnckeith
-
- Posts: 101
- Joined: Mon Apr 11, 2022 3:37 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Show me your Custom VCP's!
Ah, so the "surrounding-rectangle" of the feed override section is the 20%-Button now?
Good idea!
Good idea!
-
- Posts: 1980
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Show me your Custom VCP's!
No the Slow Joe one above with the LED on
Uwe
Uwe
-
- Posts: 21
- Joined: Sat May 14, 2022 3:34 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Show me your Custom VCP's!
Has anyone figured out how to remove the "VCP Options" and "Push to free" buttons? I would like to put other buttons there.
-
- Posts: 1980
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Show me your Custom VCP's!
You can do it with Acorn6 and CNC 4.99 Beta and in future with Acorn too
Uwe
-
- Posts: 1980
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Show me your Custom VCP's!
Acorn6 lathe with custom VCP, now complete user editable
Uwe
Uwe
-
- Posts: 21
- Joined: Sat May 14, 2022 3:34 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
Re: Show me your Custom VCP's!
Nice!
This curious UI decision is the ONLY reason I don't already own any Centroid product yet in the first place. It was super sus to reserve the most important real estate for the least important buttons and set them in stone, and then have an army of internet people try to convince me that I was the crazy one to think there was something wrong with that... on a forum DEDICATED TO EDITING THE UI.
Wake me up when I can put whatever button I want in the bottom right hand corner.
-
- Posts: 1980
- Joined: Thu Sep 23, 2021 3:49 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 6433DB0446C1-08115074
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Germany
Re: Show me your Custom VCP's!
That time is now, so wake up, but at the moment only with Acorn 6
CNC 5.00 will be available for all controls soon.
Uwe
CNC 5.00 will be available for all controls soon.
Uwe