Show me your Custom VCP's!
Moderator: cnckeith
-
- Posts: 667
- Joined: Fri Nov 30, 2018 1:04 pm
- Acorn CNC Controller: Yes
- Plasma CNC Controller: No
- AcornSix CNC Controller: No
- Allin1DC CNC Controller: No
- Hickory CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Thorp WI
Re: Show me your Custom VCP's!
In case it's not a given, a "REFRESH" button. Having to Shutdown/Exit/Relaunch, wash rinse repeat gets a bit tiring.
Scott
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Show me your Custom VCP's!
yes would allow the VCP to run while not being connected to CNC12 or an Acorn. so you can build and test (in limited way) custom VCP buttons etc.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 73
- Joined: Mon Jul 05, 2021 5:20 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A901038
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Lindenhurst, New York
Re: Show me your Custom VCP's!
I have setup the VCP to use the "one shot" button on the aux keys. I do one off jobs and it is quick and easy to just plug a few numbers in and go.
Is there anyway to get the graphics for the buttons that are in the overlay 194.pdf?
Also for some reason the only button that is not working is the face on aux 7.
Thanks
Jeff
Is there anyway to get the graphics for the buttons that are in the overlay 194.pdf?
Also for some reason the only button that is not working is the face on aux 7.
Thanks
Jeff
-
- Posts: 73
- Joined: Mon Jul 05, 2021 5:20 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A901038
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Lindenhurst, New York
Re: Show me your Custom VCP's!
Thank you Keith! That is what I was looking for. Where they somewhere that I missed? I could not find them.
I will pull a fresh report tomorrow to figure out why the face/aux 7 button does not work.
Also in the 194.pdf,which is how I set mine up, I would like to have the 4th axis clamp button. It says configured through plc.
I did load the allin1dc-rotary clamp-r1.src file during install. Everything else seems to work fantastic.
I have done a few small jobs and even some engine block repair and the control is easy to use and understand.
I am really happy that I made the conversion!
Thanks again.
Jeff
I will pull a fresh report tomorrow to figure out why the face/aux 7 button does not work.
Also in the 194.pdf,which is how I set mine up, I would like to have the 4th axis clamp button. It says configured through plc.
I did load the allin1dc-rotary clamp-r1.src file during install. Everything else seems to work fantastic.
I have done a few small jobs and even some engine block repair and the control is easy to use and understand.
I am really happy that I made the conversion!
Thanks again.
Jeff
-
- Posts: 73
- Joined: Mon Jul 05, 2021 5:20 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A901038
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Lindenhurst, New York
Re: Show me your Custom VCP's!
Keith here is the report from today.
Also ,those graphic icons are ready to go or do they have to be resized?
Thanks again
Jeff
Also ,those graphic icons are ready to go or do they have to be resized?
Thanks again
Jeff
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Show me your Custom VCP's!
the svg files are ready to go, i found a mistake in the drill array graphic i will post fresh set soon.
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 7327
- Joined: Wed Mar 03, 2010 4:23 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: Yes
- CNC Control System Serial Number: none
- DC3IOB: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Contact:
Re: Show me your Custom VCP's!
fresh VCP button graphics for One Shots buttons, i fixed drill array and added 4th axis clamp.
- Attachments
-
- one_shot_button_graphics.zip
- (10.22 KiB) Downloaded 128 times
Need support? READ THIS POST first. http://centroidcncforum.com/viewtopic.php?f=60&t=1043
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
All Acorn Documentation is located here: viewtopic.php?f=60&t=3397
Answers to common questions: viewforum.php?f=63
and here viewforum.php?f=61
Gear we use but don't sell. https://www.centroidcnc.com/centroid_di ... _gear.html
-
- Posts: 73
- Joined: Mon Jul 05, 2021 5:20 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: A901038
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Lindenhurst, New York
Re: Show me your Custom VCP's!
Thank you again Keith.
I will get them loaded over the weekend.
Any idea why the aux7/face does not work for me?
Parameters are set directly from the list and all other buttons work fine.
Jeff
I will get them loaded over the weekend.
Any idea why the aux7/face does not work for me?
Parameters are set directly from the list and all other buttons work fine.
Jeff
-
- Posts: 20
- Joined: Wed Feb 02, 2022 8:56 pm
- Acorn CNC Controller: No
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Phoenix, AZ
Re: Show me your Custom VCP's!
Just started really messing around with this. My setup is very basic so I don't have a very complex interface. I'm sure it will evolve though, this is just a noob's start.
- Attachments
-
- report_30E283DF4605-0126225588_2022-02-21_21-09-27.zip
- (1.05 MiB) Downloaded 82 times