Show me your Custom VCP's!

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

suntravel
Posts: 833
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 6433DB0446C1-08115074
Location: Germany

Re: Show me your Custom VCP's!

Post by suntravel »

20% Feedrate button added to switch fast form 100% to 20% using the VCP.

Needs PLC editing for this button.

HowTo is here:
https://centroidcncforum.com/viewtopic. ... 4&start=20

Uwe
Attachments
SlowJoeVCP.jpg
Spartan117
Posts: 96
Joined: Mon Apr 11, 2022 3:37 pm
Acorn CNC Controller: No
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Show me your Custom VCP's!

Post by Spartan117 »

Ah, so the "surrounding-rectangle" of the feed override section is the 20%-Button now?
Good idea!
suntravel
Posts: 833
Joined: Thu Sep 23, 2021 3:49 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: 6433DB0446C1-08115074
Location: Germany

Re: Show me your Custom VCP's!

Post by suntravel »

No the Slow Joe one above with the LED on :D

Uwe
Post Reply