Can one use the KP-3 on the acorn lathe as a tool setter?
I have a Taig gang lathe and was wondering how I would go about that, what are you guys using to set your tools?
KP-3 on a lathe?
Moderator: cnckeith
-
- Posts: 56
- Joined: Wed Mar 18, 2020 4:15 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: No
- Oak CNC controller: No
- CNC Control System Serial Number: 0113202827
- DC3IOB: No
- CNC12: Yes
- CNC11: No
- CPU10 or CPU7: No
- Location: Toronto
-
- Posts: 9912
- Joined: Tue Mar 28, 2017 12:01 pm
- Acorn CNC Controller: Yes
- Allin1DC CNC Controller: Yes
- Oak CNC controller: No
- CNC Control System Serial Number: none
- DC3IOB: No
- CNC12: Yes
- CNC11: Yes
- CPU10 or CPU7: Yes
- Location: Mesa, AZ
Re: KP-3 on a lathe?
The KP-3 and DP-4 have light springs.nicolasjolliet wrote: ↑Mon Nov 23, 2020 4:24 pm Can one use the KP-3 on the acorn lathe as a tool setter?
I have a Taig gang lathe and was wondering how I would go about that, what are you guys using to set your tools?
Hopefully Centroid will create a version of their TT2 using KP-3 technology.
Marty
Reminder, for support please follow this post: viewtopic.php?f=20&t=383
We can't "SEE" what you see...
Mesa, AZ
We can't "SEE" what you see...
Mesa, AZ