Which Leadshine Driver can we select from the List in the Wizard

All things related to the Centroid Acorn CNC Controller

Moderator: cnckeith

Post Reply
MJR
Posts: 2
Joined: Sat Jul 25, 2020 8:36 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Which Leadshine Driver can we select from the List in the Wizard

Post by MJR »

Dear All,
We bought the Driver HB860H. We have read that this Driver is comparable to the HBS86H Leadshine Driver. In the Wizard (selection of driver) of Centroid Acorn we have three choices that we can make with a Leadshine. We don't know what to choose. Please can you advice us in this matter.
Gary Campbell
Posts: 1395
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: Acorn 238
Location: Marquette, MI
Contact:

Re: Which Leadshine Driver can we select from the List in the Wizard

Post by Gary Campbell »

Use the "DM Series"
Set Step pulse rate to 100K
Connect to the DB25 header
Do not connect to the "ENA" terminals
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
MJR
Posts: 2
Joined: Sat Jul 25, 2020 8:36 am
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: none

Re: Which Leadshine Driver can we select from the List in the Wizard

Post by MJR »

Why do you suggest the "DM Series"? We do have a closed loop Driver. I thought we had to choose between the Leadshine CS-D1008 or the Leadshine CS-D508. The Closed Loop Driver is the HBS860H (I misspelled it in the first post, sorry).
Gary Campbell
Posts: 1395
Joined: Sat Nov 18, 2017 2:32 pm
Acorn CNC Controller: Yes
Allin1DC CNC Controller: No
Oak CNC controller: No
MPU11 & GPIO4D -w/ 3rd Party Drives: No
DC3IOB: No
CNC12: Yes
CNC11: No
CPU10 or CPU7: No
CNC Control System Serial Number: Acorn 238
Location: Marquette, MI
Contact:

Re: Which Leadshine Driver can we select from the List in the Wizard

Post by Gary Campbell »

In reality there is little or no difference, but those clone drives are closer to the DM series than the CS or ES drives. Just make sure all your other settings are correct once the drive type is selected
GCnC Control
CNC Control & Retrofits
https://www.youtube.com/user/Islaww1/videos
Post Reply